Necessary Tools
-
safety glasses
-
dust mask
-
tape measure
-
saw
-
pencil
-
level
-
nails
-
construction adhesive
-
caulking gun
-
hammer / nail gun
-
stud finder
-
paint* (optional - see step 2)
Acclimate for 3-5 Days
1
Measure Wall
Measure the height and width of the surface area you are wanting to cover with Reborn™ snow fence. Each box of reborn snow fence comes with enough material to cover 20 square feet.
2
Prepare Surface
Ensure the surface is clean, dry, and flat.
3
Find Studs
Using a stud finder, lightly mark where the studs are located with a pencil.
4
Determine Design
Be creative or pick from typical designs such as herringbone, diagonal, and staggered.
5
Starting Point
Using a level and a pencil, draw a straight line across the area where you will be installing the wall boards.
6
Install Wall Boards
Apply a liberal amount of adhesive to the back of the wall board. Place the first wall board directly above or below your starting point. Fasten the board to the studs. Repeat the application and adding pieces end to end following your reference point line, trimming the final pieces for a flush fit. Proceed with installing each row. Drive nails where the studs are located.
7
Finish
Finish edges as desired.
Congratulations! You can now decorate
and enjoy your new accented wall surface.